AQUA-DROP 1/2" drip hose – 100m, WAD1/2100
A drip or "sweating" hose is designed to provide drip irrigation for small areas and is a rational solution to the problem of watering plants planted in rows. A drip hose is also recommended for watering crops that do not like water getting on the leaves.
Using this hose allows you to save up to 70% of water compared to traditional irrigation methods. The seeping hose can be laid in the root zone of plants or buried directly in the ground (no more than 20 cm deep).
The flexible and durable AQUA-DROP hose is made of 100% rubber, which has undergone a special treatment to ensure permeability along the entire length of the hose.
Productivity: 0.76-1.26 l/min per 1 meter at a pressure of 0.7 bar. Hose diameter: 1/2" Bay length: 100 m Presence of connecting elements: no
WARNING!
- Do not use for drinking water
- Do not use for watering with hot water
- At water pressure above 1 Bar, you must use the DSA-8415 pressure reducer.
The maximum length of the hose for its proper operation should not exceed 30 m. Fittings that can be used for connection: Connector for 16mm tube,
DSWA01-16L Elbow connector for 16mm tube,
DSWA02-16L Tee connector for 16mm tube,
DSWA03-16L Plug for tube 16mm,
DSWA09-16L Adapter for 16mm tube with 1/2" male thread,
DSWA04-1216L Adapter for 16mm tube with 1/2" female thread,
DSWA05-1216L Adapter for 16mm tube with 3/4" female thread,
DSWA05-3416L Tee with external thread 1/2", fitting for 16mm tube,
DSWA06-1216L Mini crane linear fitting for 16mm tube / external thread 1/2",
DSWZ09-1216L Mini crane linear fitting for 16mm tube / 3/4" male thread,
DSWZ09-3416L Nipple for connector, connection for 16 mm tube,
DSWA13-16L
