Drip tube Ø 16 mm, distance between emitters 33 cm, 2.5 l/h – WATER DRIP – 200 m, DSWWD161130-250-200

Drip tube Ø 16 mm, distance between emitters 33 cm, 2.5 l/h – WATER DRIP – 200 m, DSWWD161130-250-200

Drip irrigation tube.

• Inner diameter: 16 mm
• Wall thickness: 1.1 mm
• Working pressure: 0.7-2.0 Bar
• Distance between emitters: 33 cm
• Water infusion: 2.5 l/h per drip
• Length in the bay: 200 m

Emitters built into the tube compensate for pressure thanks to a special labyrinth through which water moves to the dripper. As the length of the irrigation line increases, the pressure decreases, but only slightly.

In the locations of the emitters, the tube has an expanded diameter, which prevents clogging of the drippers.
The drip irrigation tube is made of high-quality virgin polyethylene, resistant to the negative effects of ultraviolet light and light chemicals. Resistant to plant root growth, as well as insect damage.

The drip tube is used similarly to the drip tape , but is more durable: it can be dismantled at the end of the season and installed in the new year. You can also leave the tube on the field for the winter, having previously drained the water from the system.

Drip irrigation tubing is widely used for irrigation of perennials, orchards, and rose gardens.
Using drip irrigation systems is a smart approach to watering. This irrigation method allows you to deliver water directly to the root zone of the plant over a long period of time.

To install the Water Drip drip tube, you will need a connecting fitting for a 16 mm tube.