Polax Carburetor Cleaner 400 ml (32-073)

Quickly and effectively cleans all types of hydrocarbon deposits (carbon deposits, tar, oil film) from fuel chambers, air and fuel jets, channels, needle valve, float chamber and carburetor flaps. Neutralizes the effects of using low-quality gasoline, reduces exhaust toxicity. Stabilizes engine operation, reducing gasoline consumption. Also used to clean the throttle valve of injection engines. An indispensable tool for cleaning the crankcase ventilation valve.
Carburetor cleaner is an effective tool for cleaning the internal and external surfaces of the carburetor, jets, intake valves, chokes and throttle valve from carbon deposits, carbon deposits, and oil residues. It allows you to clean the carburetor without dismantling it. Carburetor cleaner restores idle speed and solenoid valve performance. Significantly reduces exhaust gas toxicity. Contains substances that provide lubrication of moving parts of the carburetor. For prevention, it is recommended to clean several times a year.

How to use:

1. Stir the contents of the can by shaking it for at least 2-3 minutes;
2. Turn off the ignition, remove the air filter cover and spray the outside of the carburetor.
3. Start the engine and, holding the throttle lever, thoroughly spray the internal surfaces of the carburetor for half a minute.
4. Stop the engine, repeat the treatment of the inner surface of the carburetor. The maximum result is guaranteed if the substance is in contact with the surface for at least 2-3 minutes.
5. Start the engine and "run it through" without increasing the speed above 2000-2500 rpm.
6. If the craving has not improved, repeat the procedure, starting from point #3.

Mixture of organic solvents, surfactants, repellent gas.

NOTE:

One cylinder allows you to perform from 1 to 3 treatments depending on the level of contamination.